DIY Riveted Vias


I have developed a method for easily and cheaply creating riveted Vias for circuit boards.

  • A Via is a connection that goes from one side of a PCB to the other.  There are times that you want to electrically or thermally connect the two sides of a board, and a regular commercial or soldered Via will not work – for instance a via in a home-made board may be under a chip and must be flush, or one is in a SMT pad and you don’t want the solder to wick down a via hole, or the via may need better thermal or current carrying capabilities.  Here is the full article, now updated with more photos.

Update: I am building a test board with 100 vias in series, and a Themal Cycling Test Rig to determine if thermal cycling will cause failures in these kind of copper via rivets in FR4.  See above.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s